International Journal of Innovative Research in Computer Science and Technology
Year: 2022, Volume: 10, Issue: 4
First page : ( 102) Last page : ( 110)
Online ISSN : 2347-5552
DOI: 10.55524/ijircst.2022.10.4.12 |
DOI URL: https://doi.org/10.55524/ijircst.2022.10.4.12
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (CC BY 4.0)http://creativecommons.org/licenses/by/4.0
Article Tools: Print the Abstract | Indexing metadata | How to cite item | Email this article | Post a Comment
Saaid Showkat , Krishna Tomar
There had been significant growth in the area of renewable energy over the past recent years. Though there has been great development in sustainable energy, there is still a long way to go.There are certain inherent limits to this renewable electricity. Solar and wind electricity, for example, have an intermittent character. In comparison to the electric load, the electro-chemical reaction dynamics in the fuel cell are rather sluggish. This is incompatible with current electric applications, which demand continuous voltage and frequency. This research suggested and tested a novel power circuit to address the problem of renewable energy's intermittent nature and poor reaction. The proposed circuit combines a variety of renewable energy sources with energy storage. The influence of intermittent nature can be considerably decreased by combining biofuels have a probabilistic proclivity towards compensating for one another. The above integration will improve the entire system's dependability and efficiency. It may either deliver more energy to the load or absorb surplus energy from the energy sources, considerably enhancing the overall system dynamics. We provide electricity for the load using fuel cells, while solar and wind energy are employed to maintain power. We're employing buck boost choppers and boost choppers to adjust the power to the right level. For AC loads, an inverter converts DC to AC. We use renewable energy in our project to ensure steady electricity during load. In MATLAB / Simulink, a software simulation model is created.
M. Tech Scholar, Department of Electrical Engineering, RIMT University, Mandi Gobingarh, Punjab, India
No. of Downloads: 36 | No. of Views: 1583
Shivendra Pandey, Pavan Kumar Singh, Gaurav Gupta.
July 2026 - Vol 14, Issue 4
Nakul Datt Chauhan, Wazid Ali, Gaurav Gupta.
July 2026 - Vol 14, Issue 4
Amit Kumar Mishra, Gaurav Gupta.
July 2026 - Vol 14, Issue 4
