Seismic Protection with Base Isolation Method Using ETABS

Mohammad Muzamil; Manish Kaushal

doi:10.55524/ijircst.2022.10.3.25

Abstract

Base isolation is one of the most promising alternatives among the structure control methods. In recent decades, base isolation has been seriously considered for civil structures, such as buildings and bridges, subjected to ground motion. Seismic isolation technique had been applied successfully abroad, especially in Japan, and buildings with seismic isolation design had good performances in the earthquakes before. Seismic isolation technique has developed well in recent years in our country. After the Wenchuan earthquake, some departments revised the Code for Seismic Design of Buildings and relaxed some restraint of seismic isolation design. Using the isolation design correctly the buildings can get a good capability of seismic resistance. It is a good choice for the reconstruction of the important buildings. Focus on description of the concept of seismic design and the design method of base-isolated structure of Zundao CentralSchooland hospital.

Keywords

Earthquake zones, Base isolation, Seismic Forces, Finite Element, ETABS

References

Pranesh Mrunal and Ravi Sinha- In this paper, behavior of structures isolated using VFPI subjected to near source ground motions has been numerically examined
Vasant A. Matsagar and R. S. Jangid-Analysis response of structures retrofitted using base isolation devices are investigated and the retro fit schemes are illustrated
BrunoBriseghellaet.al- The base isolation system(BIS) has been suggested as an innovative retrofit strategy and adopted for the seismic upgradingof some major buildings
ByLinSuet.al- In this paper a comparative study of effectiveness of various base isolators is carried out
B.M.SaifulIslamet.al-This paper covers the design of base isolators for a building located in Dhaka, Bangladesh , along with its structural and economic feasibility.
J.C.Ramalloet.al- A „„smartâ€Ÿâ€Ÿ base isolation strategy is proposed and shown to effectively protect structures against extreme earthquakes without sacrificing performance during the morefrequent, moderate seismic events
SarveshK.JainandShashiK.Thakkar- Seismic isolation enables the reduction in earthquake forces by lengthening the period of vibration of the structure
FabioMazzaandAlfonsoVulcano- The main objective of this work is to compare different base-isolation techniques, in order to evaluate their effects on the structural response and applicability limits under near-fault earthquakes.
N.TorunbalciandG.Ozpalanlar- The main objective of this work is to make a comparison between the seismic isolation and fixed based building, rather than comparing seismic isolation alternatives with in themselves
VinodkumarParmaandG.S.Hiremath- The main objective of this work is to compare the response of the building such as Time period and Base shear for 15 storied RC plan and vertical irregular building with and without base isolation by considering the time history analysis.
G.P.ChandradharaandM.B.Vikram- The main objective of this study is to study the effect of wind load on gravity load. Variation of bending moment and axial force in columns is considered to study the behavior of frames
ManojU.DeosarkarandS.D.Gowardhan- In this research, 6-storey RCC structures are designed as isolated and fixed base.
GangaWarrierA.et.al.- The principle of base isolation is vibration isolation. It decouples the building from damaging action of the earthquakes.
Md.MohiuddinAhmedet.al- The seismic performance of both regular shape and irregular shape building depends on height of the building along with other important structural parameters
SathishKumarKet.al- The paper deals with in the passive way of achieving seismic response control by introducing isolators between foundation and superstructure.
PengPanet.al- This paper deals with recent design and construction of base- isolated building structures in japan, including statistical data with respect to the common usage as well as the number of new projects
MahendraBalasahebShelkeandV.A.Kuwar- This paper studied the different cases of the aspect ratio of the building and the effect of wind and earthquake forces on the building
KiranKamathandShruthi-This paper focuses on the effect of different aspect ratio i.e./B, where H is the Total height of the building frame and B is the Base Width of the buildingframe, on the seismic performance of the steel frame structure with and without infill

Cites this article as

M. Muzamil, M. Kaushal, "Seismic Protection with Base Isolation Method Using ETABS", International Journal of Innovative Research in Computer Science and Technology (IJIRCST), vol. 10, no. 3, pp. 152-157, 2022. doi: https://doi.org/10.55524/ijircst.2022.10.3.25

Corresponding Author

Mohammad Muzamil

M. Tech Scholar, Department of Civil Engineering, RIMT University, Mandi Gobindgarh, India

Download Full Paper

Download PDF

No. of Downloads: 56 | No. of Views: 2095

Seismic Protection with Base Isolation Method Using ETABS

Citations

Total View 2095

Total Download 56