The Effect of Different Physical Treatment and Stimulation Temperature on OSL Decay Curve of Synthetic Quartz Material

T. B. Akhani; Y. D. Kale; Y. H. Gandhi

doi:10.55524/ijircst.2022.10.2.108

Abstract

Researchers reported, in natural quartz probability of re-trapping of electrons by shallow TL traps gets reduced for Optically Stimulated Luminescence (OSL) at around 160 0C and usual shape of OSL decay curve is obtained. Under influence of critical physical condition followed by optical stimulation at room temperature in synthetic quartz material, identical OSL outcomes are observed. Below these critical physical conditions to the material neither usual shape of OSL decay curve is obtained nor does it give significant OSL signals. In current investigations, the consequence of different physical treatment on OSL decay curve of synthetic quartz material is studied. As an OSL outcome, the variations in shape of OSL decay curve as well as OSL strength over 0 to 100 seconds of stimulation time are discussed. Changes in OSL outcomes are responsible to strength of physical treatment to the sample and stimulation temperature followed by growth of favourable new centres. The unusual shape of OSL decay curve suggests the re trapping of optically unconfined electrons still occurred in traps rather than shallow TL traps corresponding to 110oC glow peak. The results are elaborated by resolving components of complex shapes of OSL decay curve and recorded TL glow curves before and after OSL for identical physical conditions to the sample.

Keywords

Annealing Treatment, Beta Dose, Elevated Temperature, Optically Stimulated Luminescence (OSL), Synthetic Quartz, Stimulation Temperature.

References

[1] L. Yuan, Y. Jin, Y. Su, H. Wu, Y. Hu, and S. Yang, “Optically Stimulated Luminescence Phosphors: Principles, Applications, and Prospects,” Laser and Photonics Reviews. 2020, doi: 10.1002/lpor.202000123.

[2] J. Marcazzó, V. R. Orante-Barrón, L. Camargo, C. Cruz-Vázquez, and R. Bernal, “Optically stimulated luminescence dosimetry performance of novel MgO–La(OH)3 phosphors,” Appl. Radiat. Isot., 2020, doi: 10.1016/j.apradiso.2019.109031.

[3] A. G. Wintle and G. Adamiec, “Optically stimulated luminescence signals from quartz: A review,” Radiation Measurements. 2017, doi: 10.1016/j.radmeas.2017.02.003.

[4] Y. Kitagawa, E. G. Yukihara, and S. Tanabe, “Development of Ce3+ and Li+ co-doped magnesium borate glass ceramics for optically stimulated luminescence dosimetry,” J. Lumin., 2021, doi: 10.1016/j.jlumin.2020.117847.

[5] L. Bøtter-Jensen, S. W. S. McKeever, and A. G. Wintle, Optically Stimulated Luminescence Dosimetry. 2003.

[6] N. Shrestha, D. Vandenbroucke, P. Leblans, and E. G. Yukihara, “Feasibility studies on the use of MgB4O7:Ce,Li-based films in 2D optically stimulated luminescence dosimetry,” Phys. Open, 2020, doi: 10.1016/j.physo.2020.100037.

[7] D. J. Furbish, J. J. Roering, A. Keen-Zebert, P. Almond, T. H. Doane, and R. Schumer, “Soil Particle Transport and Mixing Near a Hillslope Crest: 2. Cosmogenic Nuclide and Optically Stimulated Luminescence Tracers,” J. Geophys. Res. Earth Surf., 2018, doi: 10.1029/2017JF004316.

[8] S. Lim-Reinders, B. M. Keller, A. Sahgal, B. Chugh, and A. Kim, “Measurement of surface dose in an MR-Linac with optically stimulated luminescence dosimeters for IMRT beam geometries,” Med. Phys., 2020, doi: 10.1002/mp.14185.

[9] J. M. Kalita, Kaya-KeleÅŸ, G. Çakal, N. Meriç, and G. S. Polymeris, “Thermoluminescence and optically stimulated luminescence properties of ulexite mineral,” J. Lumin., 2021, doi: 10.1016/j.jlumin.2020.117759.

[10] R. M. Bailey, B. W. Smith, and E. J. Rhodes, “Partial bleaching and the decay form characteristics of quartz OSL,” Radiat. Meas., 1997, doi: 10.1016/S1350-4487(96)00157-6.

[11] E. G. Yukihara, “Characterization of the thermally transferred optically stimulated luminescence (TT-OSL) of BeO,” Radiat. Meas., 2019, doi: 10.1016/j.radmeas.2019.106132.

[12] V. Chobpattana, T. Chutimasakul, N. Rungpin, N. Rattanarungruangchai, P. Assavajamroon, and T. Kwamman, “Synthesis and characterization of flower-like Al2O3:C for optically stimulated luminescence (OSL) dosimeter,” Mater. Res. Express, 2021, doi: 10.1088/2053-1591/ac2286.

[13] L. Harwood, “Handbook of Radioactivity Analysis, 3rd edition,” Synthesis (Stuttg)., 2012, doi: 10.1055/s-0032-1316817.

[14] J. P. Feist, A. L. Heyes, and S. Seefeldt, “Thermographic Phosphors for Gas Turbines: Instrumentation Development and Measurement Uncertainties,” 11th Int. Symp. Appl. laser Tech. to fluid Mech., 2002.

[15] A. N. Yazici and M. Topaksu, “The analysis of thermoluminescence glow peaks of unannealed synthetic quartz,” J. Phys. D. Appl. Phys., 2003, doi: 10.1088/0022-3727/36/6/303.

[16] J. Singh, S. J. Sangode, and P. D. Sabale, “Mineral magnetic and XRD spectroscopic studies to investigate the firing temperatures of archeological potsherds,” J. Archaeol. Sci. Reports, 2021, doi: 10.1016/j.jasrep.2020.102759.

[17] D. Griggs, “Hydrolytic Weakening of Quartz and Other Silicates,” Geophys. J. R. Astron. Soc., 1967, doi: 10.1111/j.1365-246X.1967.tb06218.x.

[18] P. Srivastava, D. Khanduja, and S. Ganesan, “Fuzzy methodology application for risk analysis of mechanical system in process industry,” Int. J. Syst. Assur. Eng. Manag., 2020, doi: 10.1007/s13198-019-00857-y.

Cites this article as

T. B. Akhani, Y. D. Kale, Y. H. Gandhi, "The Effect of Different Physical Treatment and Stimulation Temperature on OSL Decay Curve of Synthetic Quartz Material", International Journal of Innovative Research in Engineering & Management (ijircst), Vol-10, Issue-2, Page No-558-567, 2022. Available from: https://doi.org/10.55524/ijircst.2022.10.2.108

Corresponding Author

T. B. Akhani

Parul Institute of Applied Sciences, Parul University, P O Limda, Vadodara.

Download Full Paper

Download PDF

No. of Downloads: 34 | No. of Views: 943

The Effect of Different Physical Treatment and Stimulation Temperature on OSL Decay Curve of Synthetic Quartz Material

Citations

Download Full Paper PDF

Total View 943

Total Download 34